Application:
This is a superior pH 8.5 Cleaner to be used on ceramic tile, agglomerate, cultured stone, cast stone, and existing or all new interior and exterior natural stone, regardless of surface finish. It has a very good performance to remove cement/grout film residue, soil, light wax coats, and light construction dirt. We recommende you to use it on polished and honed surfaces for it doesn't contain acid and won't etch finishes.
How to use:
For initial cleaning apply full strength or half Strength depending on nature of cleaning.
Periodic thorough cleaning:
1. Dilute 1:10-1:15 with water.
2. Then let it stand for 10-20 minutes, but don't let R55 dry on the surface.
3. Vigorously Scrub with a scrubbing sponge, nylon scrub brush or white/tan polyester pad.
4. Re-wet area with the same solution as needed. Let it stand again for a few minutes.
5. Then flood and rinse with clean water and sponge up, or use wet vac (use de-foamer in vacuum).
6. If stubborn spots, may be need a second application. And it may be necessary to rinse for twice or triple, especailly using a sealer/impregnator or a polish would have a better performance. You'd better to use a de-foamer in wet-vaces to avoid foaming in scrubber tanks.
For larger walls or shower areas, you can use a professional cleaning sponge with cleaner. Rinse with clean water, and also let surface completely dry before using sealers.
For larger floor applications, you can use a scrubbing mop pad with our professional mop kit. Rinse with clean water, and let surface completely dry before using sealers.
Coverage:
Approximately 125 sqft., or 11 ㎡ at full strength; 1800 sqft., 165 ㎡/1 liter (34 oz.) container.
Warning:
This is chemical product which features non flammable, mild odor, non toxic, no fumes. Please keep it out of reach of children.
Click to view larger image.
