The Micro Powder Mill(ultrafine mill) is for super-fine grinding materials with hardness less than 6 in Moh’s scale and humidity less than 6 percent such as kaolin, limestone, calcite, marble,talcum, barite, gypsum, dolomite, bentonite mud,mica, pyrophyllite, sepiolite, diatomite, graphite, alunite, fluorite, potassium feldspar, phosphorite, pigment and so on. The granularity of the end products is 325-2500 meshes (0.044-0.0055mm).
Features of Oriental Micro Powder Mill
● High-efficiency and low consumption
With the same end-products fineness and motor power, its output can be doubled comparing with Jet Mill, Mix Mill, and Ball Mill.
● longer service life for wearing parts.
The grinding roll and ring are made of special alloy. Generally, their service life is more than one year, but in certain condition which could up to over 3 years, like when it processes calcium carbonate and Calcite.
● More secure and Reliable.
There is no rolling bearings and screws in the grinding cavity, so no problems caused by the wear of bearings or screws
● Good performance on Cleansing and Environment Protection
This machine greatly reduces the industrial dust pollution and noise by applying Pulse dust collector and muffler, which reaches the National Standard.
Technical data of Oriental Micro Powder Mill
|
Mode |
Roller Numbers(pcs) |
Ring Diameter (mm) |
Ring Numbers (pcs) |
Max. Feeding Size (mm) |
Output Size(mm) |
Capacity (kg/h) |
Motor Power (Kw) |
Overall Dimension (mm) |
|
ZYM80 |
21 |
ø800 |
3 |
20 |
0.044-0.005 |
600-4500 |
55 |
13000×3000×5800 |
|
ZYM90 |
24 |
ø900 |
3 |
20 |
0.044-0.005 |
700-5500 |
37×2 |
14700×4800×7200 |
|
ZYM100 |
27 |
ø1000 |
3 |
20 |
0.044-0.005 |
900-6500 |
110 |
18000×4000×8600 |
|
ZYM100A |
36 |
ø1000 |
4 |
20 |
0.044-0.005 |
1000-7500 |
110 |
18000×4600×8600 |
